RouterBitMall

Dovetail 1/2" x 14° 1/2" Shank Router Bit

$15.00 AUD

Sale Sold out

Shipping calculated at checkout.

Available in yellow and red. Colors will be shipped randomly based on stock availability.

Quantity

The dovetail is probably the most recognizable of all woodworking joints. A dovetail joint is self-aligning and interlocking. There are numerous versions of the dovetail joint, including half blind dovetails, through dovetails, mitered dovetails and sliding dovetails. All of these variations are common in casework and drawer construction. A single dovetail bit can make almost any kind of dovetail, depending on the desired size. You'll need a jig to make most dovetail joints, as well as a guide bushing for your router. Check the instructions with your dovetail jig to select a bit with the appropriate angle, which will usually be somewhere between 7 and 14 degrees.

This dovetail bit has a cutting diameter of 1/2", and angle of 14° and a cutting height of 17/32". The shank diameter is 1/2"

Bit Specs
Material:Carbide
Degrees:14°
Number of Flutes:2
Number of Bits:1
Cutting Diameter:1/2"
Cutting Length:17/32"
Overall Length:2-5/32"
Shank Size:1/2"

View full details

Excellent

I dont buy generic brand bits and stick with good brand bits as they tend to be more well made and last longer. I'm using this to route a dovetail in my shop fixtures to use with the MicroJig dovetail clamps and it works very very well.