Available in yellow and red. Colors will be shipped randomly based on stock availability.
Couldn't load pickup availability
A tongue and groove joint is the ideal way to create flat, even joints for flooring, wainscoting, panels and tabletops. Tongue and groove router bits will cut the 2 mating profiles for this easy to make woodworking joint with ease and with a simple setup. This joint also provides a lot of gluing surface as well as aligning ease. Tongue and groove bits can take quite a big bite out of the wood, so using these bits in a router table is strongly recommended. Align the bearing with your fence using a straight edge. Make multiple passes increasing the cutting depth by 1/8" for each pass until you achieve full depth. Even though some smaller tongue and groove bits can be utilized in a hand-held router the stability of a table will help keep the joint perfectly square. This high quality tongue and groove router bit set will serve you well for many projects. For best results, use with solid wood only.
This matching tongue and groove router bit set cuts a 1/4" thick tongue into stock up to 3/4" thick. The cutting depth is 1/2" and the shank diameter is 1/2". The router bit set is pre-shimmed and comes in a handsome wooden box. Additional shims are included in case further adjustments are necessary.
Bit Specs Material:Carbide Tipped Number of Bits:2 Shank Size:1/2" Cutting Depth:1/2" Largest Diameter:1-7/8" Number of Flutes:3 Minimum Stock Thickness:1/2" Maximum Stock Thickness:3/4"
